Initialize a new instance of the barcode control.

Special character used to specify that an Application Identifier (AI) is 2-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 3-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 4-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 5-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

End Of Transmission character (ASCII 4).

Function 1 Symbol Character (FNC1) used by GS1-128 and UCC/EAN-128 barcodes.

Group Separator character (ASCII 29).

Record Separator character (ASCII 30).

Gets or sets whether checksum must be calculated and attached to the value to encode.

Gets or sets the Error Correction Percentage to apply for Aztec Code symbology. Default is 23.

Gets or sets the Aztec Code Format to use on that symbology.

Gets or sets the Aztec Code module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the Aztec Code Rune value. It must be a value from 0 to 255 and is available for Aztec Code Compact Format only.

Gets or sets the unit of measure for the barcode.

Gets or sets the bars' color of the barcode.

Gets or sets the bars' height of the barcode. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the wide bars' width compared to the narrow bars' width. In barcode terminology this is N value.

Gets or sets the narrow bars' width of the barcode. In barcode terminology this is X value. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the Bar Width Adjustment.

Gets or set the bearer bars' type that must be drawn with the barcode image. Bearer bar is only available for 2 of 5, Code 128 and UCC.EAN 128 barcodes.

Gets or sets the bearer bars' width. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the start character for Codabar symbology. Possible values are: A, B, C or D.

Gets or sets the stop character for Codabar symbology. Possible values are: A, B, C or D.

Gets or sets the value to encode.

Gets or sets the characters set to use in the Code 128 symbology. Possible values are: Auto, A, B or C.

Gets or sets the mode to use for Code16k symbology. Modes supported are: Mode 0, 1, and 2.

Gets or sets the text alignment for Code property.

Gets or sets the DataMatrix Encoding to use on that symbology.

Gets or sets the DataMatrix Format to use on that symbology.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether tilde character should be processed when DataMatrix code is being generated.

Gets or sets whether checksum value must be displayed after the value to encode on the barcode.

Gets or sets whether the value to encode must be displayed on the barcode.

Gets or sets whether light margin indicators must be displayed in the barcode image. Only available for EAN/UPC Symbologies.

Gets or sets whether start and stop characters must be displayed on the barcode.

Gets or sets the supplement type to use with EAN and UPC symbologies.

Gets or sets the supplement value for EAN and UPC symbologies.

Gets or sets the gap separation between the barcode and its supplement. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the height of the margin above the EAN/UPC supplement bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether the extended versions for Code 39 and/or Code 93 symbologies must be used.

Gets or sets the name of the specified font for Code or HumanReadableText property.

Gets or sets the font size for Code or HumanReadableText property. The unit of measure must be specified to FontUnit property.

Gets or sets the degree to which a font for Code or HumanReadableText property is condensed or expanded.

Gets or sets the font style for Code or HumanReadableText property.

Gets or sets the unit of measure for the font object.

Gets or sets the weight or thickness of the specified font for Code or HumanReadableText property.

Gets or sets a brush that describes the foreground color for Code or HumanReadableText property.

Gets or sets whether guard bars must be drawn for EAN and UPC symbologies.

Gets or sets the guard bars' height. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether the Human Readable Text is formatted as specified by HIBC Standards i.e. Zeros are displayed as Slashed-Zeros and the Space character is displayed as an Underscore.

Gets or sets the Human Readable Text to be displayed instead of the value to encode specified in the Code property.

Gets or sets the ISBT 128 Data Structure to be generated.

Gets or sets the License Key for product registration.

Gets or sets the License Owner for product registration.

Gets or sets the MaxiCode mode.

Gets or sets whether tilde character should be processed when MaxiCode code is being generated.

Gets or sets the number of MaxiCode symbols in a Structured Appended format. Its value must be less than or equal to 8.

Gets or sets the Symbol Index for a Structured Appended MaxiCode. Its value must be 1 up to 8 and must be less than the value in MaxiCodeSymbolCount property.

Gets or sets the MicroPDF417 version (a predefined combinations of numbers of columns and rows) to be generated.

Gets or sets the Micro QR Code Version to use on that symbology.

Gets or sets the checksum mode to be used on MSI symbology.

Gets or sets the ratio of the height to the overall width of the PDF417 symbol. Its value must be 0 (zero) up to 1 (one).

Gets or sets the number of columns to use for PDF417 symbology.

Gets or sets the Compaction Type to apply for PDF417 symbology.

Gets or sets the Error Correction Level to apply for PDF417 symbology.

Gets or sets the File ID of the Macro PDF417 symbol. Its value must be a sequence of codewords (Each codeword value must be a number between 000 and 899) and must be the same for all data segments.

Gets or sets the number of rows to use for PDF417 symbology.

Gets or sets the number of Macro PDF417 symbols. Its value must be less than or equal to 99999.

Gets or sets the Segment Index for a Macro PDF417 symbol. Its value must be 0 (zero) up to 99998 and must be less than the value in Pdf417SegmentCount property.

Gets or sets whether the right side of PDF417 barcode is truncated (removed).

Gets or sets the gap between Pharmacode bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the width of Pharmacode Thick Bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the width of Pharmacode Thin Bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the short bars' height of Planet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tall bars' height of Planet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether start and stop characters must be added and drawn on the barcode.

Gets or sets the gap spacing between bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tracker bar's height. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tracker bar's width. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the short bars' height of Postnet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tall bars' height of Postnet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the QR Code Encoding to use on that symbology.

Gets or sets the Error Correction Level to apply for QR Code symbology.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the QR Code Version to use on that symbology.

Gets or sets the quiet zones. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the number of segments per row to be used in GS1 DataBar Expanded Stacked or RSS Expanded Stacked symbologies. It must be an even number ranging from 2 up to 22. Default is 4.

Gets or sets the barcode symbology/standard to generate.

Gets or sets the Telepen Encoding to use on that symbology.

Gets or sets the additional text to show in the barcode image e.g. 'Product ID'. Note: This is not the value to encode.

Gets or sets the text alignment for Text property.

Gets or sets the name of the specified font for Text property.

Gets or sets the font size for Text property. The unit of measure must be specified to TextFontUnit property.

Gets or sets the degree to which a font for Text property is condensed or expanded.

Gets or sets the font style for Text property.

Gets or sets the unit of measure for the font object for Text property.

Gets or sets the weight or thickness of the specified font for Text property.

Gets or sets a brush that describes the foreground color for Text property.

Gets or sets the number system to use for UPC-E symbology.

Gets or sets a value that determines whether to use rounding behavior that aligns layout to whole pixels.

Gets or sets whether quiet zones are used for drawing Text, Code and HumanReadableText properties.

Gets or sets the USPS FIM pattern to use on that symbology.

Gets or sets the number of horizontal bars to be drawn.