Initializes a new instance of the BarcodeProfessional class

Initializes a new instance of the BarcodeProfessional class

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control.

Notifies the accessibility client applications of the specified AccessibleEvents for the specified child control .

Executes the specified delegate asynchronously on the thread that the control's underlying handle was created on.

Executes the specified delegate asynchronously with the specified arguments, on the thread that the control's underlying handle was created on.

Brings the control to the front of the z-order.

Retrieves a value indicating whether the specified control is a child of the control.

Creates a new accessibility object for the control.

Forces the creation of the control, including the creation of the handle and any child controls.

Creates a new instance of the control collection for the control.

Creates the Graphics for the control.

Creates a handle for the control.

Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object.

Sends the specified message to the default window procedure.

Destroys the handle associated with the control.

Releases all resources used by the Component.

Releases the unmanaged resources used by the BarcodeProfessional and optionally releases the managed resources

Begins a drag-and-drop operation.

Draws the barcode onto the graphics object at the origin point.

Draws the barcode onto the graphics object at the given point.

Draws the barcode onto the specified graphics object fitting the bars into the specified size.

Draws the barcode onto the graphics object at the given point and in the specified scale.

Draws the barcode onto the graphics object at the given point and in the specified scale.

Supports rendering to the specified bitmap.

Retrieves the return value of the asynchronous operation represented by the IAsyncResult passed.

Determines whether the specified Object is equal to the current Object.

Releases unmanaged resources and performs other cleanup operations before the Component is reclaimed by garbage collection.

Retrieves the form that the control is on.

Sets input focus to the control.

Retrieves the specified AccessibleObject.

Retrieves a value indicating how a control will behave when its AutoSize property is enabled.

Gets a System.Drawing.Image object of the barcode image.

Gets a byte array that represents the barcode image.

Gets a System.Drawing.Image object of the barcode image at the specified resolution.

Gets a byte array that represents the barcode image at the specified resolution.

Gets a System.Drawing.Image object of the barcode image fitting the bars into the specified size and resolution.

Gets a System.Drawing.Image object of the barcode image at the specified horizontal and vertical resolutions.

Gets a byte array that represents the barcode image fitting the bars into the specified size.

Gets a byte array that represents the barcode image at the specified horizontal and vertical resolutions.

Gets a System.Drawing.Image object of the barcode image fitting the bars into the specified size and resolutions.

Gets a byte array that represents the barcode image fitting the bars into the specified size and resolutions.

Retrieves the child control that is located at the specified coordinates.

Retrieves the child control that is located at the specified coordinates, specifying whether to ignore child controls of a certain type.

Returns the next ContainerControl up the control's chain of parent controls.

This method can be called when a barcode image want to be shown in a Crystal Reports report. For more information about it visit Neodynamic's website at http://www.neodynamic.com

This method can be called when a barcode image want to be shown in a Crystal Reports report. For more information about it visit Neodynamic's website at http://www.neodynamic.com

Serves as a hash function for a particular type.

Retrieves the current lifetime service object that controls the lifetime policy for this instance.

Retrieves the next control forward or back in the tab order of child controls.

Retrieves the size of a rectangular area into which a control can be fitted.

Retrieves the bounds within which the control is scaled.

Returns an object that represents a service provided by the Component or by its Container.

Retrieves the value of the specified control style bit for the control.

Determines if the control is a top-level control.

Gets the Type of the current instance.

Conceals the control from the user.

Obtains a lifetime service object to control the lifetime policy for this instance.

Called after the control has been added to another container.

Invalidates the entire surface of the control and causes the control to be redrawn.

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

Invalidates a specific region of the control and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control.

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

Invalidates the specified region of the control (adds it to the control's update region, which is the area that will be repainted at the next paint operation), and causes a paint message to be sent to the control. Optionally, invalidates the child controls assigned to the control.

Executes the specified delegate on the thread that owns the control's underlying window handle.

Executes the specified delegate, on the thread that owns the control's underlying window handle, with the specified list of arguments.

Raises the GotFocus event for the specified control.

Raises the LostFocus event for the specified control.

Raises the Click event for the specified control.

Raises the Paint event for the specified control.

Raises the PaintBackground event for the specified control.

Determines if a character is an input character that the control recognizes.

Determines whether the specified key is a regular input key or a special key that requires preprocessing.

Creates a shallow copy of the current Object.

Creates a shallow copy of the current MarshalByRefObject object.

Raises the Invalidated event with a specified region of the control to invalidate.

Raises the AutoSizeChanged event.

Raises the BackColorChanged event.

Raises the BackgroundImageChanged event.

Raises the BackgroundImageLayoutChanged event.

Raises the BindingContextChanged event.

Raises the CausesValidationChanged event.

Raises the ChangeUICues event.

Raises the Click event.

Raises the ClientSizeChanged event.

Raises the ContextMenuChanged event.

Raises the ContextMenuStripChanged event.

Raises the ControlAdded event.

Raises the ControlRemoved event.

Raises the CreateControl  method.

Raises the CursorChanged event.

Raises the DockChanged event.

Raises the DoubleClick event.

Raises the DragDrop event.

Raises the DragEnter event.

Raises the DragLeave event.

Raises the DragOver event.

Raises the EnabledChanged event.

Raises the Enter event.

Raises the GiveFeedback event.

Raises the GotFocus event.

Raises the HandleCreated event.

Raises the HandleDestroyed event.

Raises the HelpRequested event.

Raises the ImeModeChanged event.

Raises the Invalidated event.

Raises the KeyDown event.

Raises the KeyPress event.

Raises the KeyUp event.

Raises the Layout event.

Raises the Leave event.

Raises the LocationChanged event.

Raises the LostFocus event.

Raises the MarginChanged event.

Raises the MouseCaptureChanged event.

Raises the MouseClick event.

Raises the MouseDoubleClick event.

Raises the MouseDown event.

Raises the MouseEnter event.

Raises the MouseHover event.

Raises the MouseLeave event.

Raises the MouseMove event.

Raises the MouseUp event.

Raises the MouseWheel event.

Raises the Move event.

Notifies the control of Windows messages.

Raises the PaddingChanged event.

Paints the background of the control.

Raises the BackColorChanged event when the BackColor property value of the control's container changes.

Raises the BackgroundImageChanged event when the BackgroundImage property value of the control's container changes.

Raises the BindingContextChanged event when the BindingContext property value of the control's container changes.

Raises the ParentChanged event.

Raises the CursorChanged event.

Raises the EnabledChanged event when the Enabled property value of the control's container changes.

Raises the FontChanged event when the Font property value of the control's container changes.

Raises the ForeColorChanged event when the ForeColor property value of the control's container changes.

Raises the RightToLeftChanged event when the RightToLeft property value of the control's container changes.

Raises the VisibleChanged event when the Visible property value of the control's container changes.

Raises the PreviewKeyDown event.

Raises the Paint event.

Raises the QueryContinueDrag event.

Raises the RegionChanged event.

Raises the Resize event.

Raises the RightToLeftChanged event.

Raises the SizeChanged event.

Raises the StyleChanged event.

Raises the SystemColorsChanged event.

Raises the TabIndexChanged event.

Raises the TabStopChanged event.

Raises the TextChanged event.

Raises the Validated event.

Raises the Validating event.

Raises the VisibleChanged event.

Forces the control to apply layout logic to all its child controls.

Forces the control to apply layout logic to all its child controls.

Computes the location of the specified screen point into client coordinates.

Computes the location of the specified client point into screen coordinates.

Preprocesses keyboard or input messages within the message loop before they are dispatched.

Preprocesses keyboard or input messages within the message loop before they are dispatched.

Processes a command key.

Processes a dialog character.

Processes a dialog key.

Processes a key message and generates the appropriate control events.

Processes a keyboard message.

Previews a keyboard message.

Processes a mnemonic character.

Raises the appropriate drag event.

Raises the appropriate key event.

Raises the appropriate mouse event.

Raises the appropriate paint event.

Forces the re-creation of the handle for the control.

Computes the size and location of the specified screen rectangle in client coordinates.

Computes the size and location of the specified client rectangle in screen coordinates.

Forces the control to invalidate its client area and immediately redraw itself and any child controls.

Resets the BackColor property to its default value.

Causes a control bound to the BindingSource to reread all the items in the list and refresh their displayed values.

Resets the Cursor property to its default value.

Resets the Font property to its default value.

Resets the ForeColor property to its default value.

Resets the ImeMode property to its default value.

Resets the control to handle the MouseLeave event.

Resets the RightToLeft property to its default value.

Resets the Text property to its default value.

Resumes usual layout logic.

Resumes usual layout logic, optionally forcing an immediate layout of pending layout requests.

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

Converts the specified ContentAlignment to the appropriate ContentAlignment to support right-to-left text.

Converts the specified HorizontalAlignment to the appropriate HorizontalAlignment to support right-to-left text.

Converts the specified LeftRightAlignment to the appropriate LeftRightAlignment to support right-to-left text.

Saves this barcode image to the specified Stream object in the specified format.

Saves this barcode image to the specified file in the specified format.

Saves this barcode image to the specified Stream object in the specified format and resolution.

Saves this barcode image to the specified file in the specified format and resolution.

Saves this barcode image to the specified Stream object in the specified format, resolution and fitting the bars into the specified size.

Saves this barcode image to the specified Stream object in the specified format and resolution.

Saves this barcode image to the specified file in the specified format, resolution and fitting the bars into the specified size.

Saves this barcode image to the specified file in the specified format and resolution.

Saves this barcode to the specified Stream object and text encoding in EPS (Encapsulated PostScript) format.

Saves this barcode to the specified file in EPS (Encapsulated PostScript) format.

Saves this barcode to the specified Stream object and text encoding in EPS (Encapsulated PostScript) format with CMYK color space.

Saves this barcode to the specified Stream object and text encoding in EPS (Encapsulated PostScript) format and fitting the bars into the specified size.

Saves this barcode to the specified file in EPS (Encapsulated PostScript) format with CMYK color space.

Saves this barcode to the specified file in EPS (Encapsulated PostScript) format and fitting the bars into the specified size.

Saves this barcode to the specified Stream object and text encoding in EPS (Encapsulated PostScript) format with CMYK color space and fitting the bars into the specified size.

Saves this barcode to the specified file in EPS (Encapsulated PostScript) format with CMYK color space and fitting the bars into the specified size.

Scales the control and any child controls.

Scales the control and all child controls by the specified scaling factor.

Scales the entire control and any child controls.

Scales a control's location, size, padding and margin.

This method is not relevant for this class.

Activates the control.

Activates a child control. Optionally specifies the direction in the tab order to select the control from.

Activates the next control.

Sends the control to the back of the z-order.

Sets a value indicating how a control will behave when its AutoSize property is enabled.

Sets the bounds of the control to the specified location and size.

Sets the specified bounds of the control to the specified location and size.

Performs the work of setting the specified bounds of this control.

Sets the size of the client area of the control.

Sets a specified ControlStyles flag to either true or false.

Sets the control as the top-level control.

Sets the control to the specified visible state.

Displays the control to the user.

Determines the size of the entire control from the height and width of its client area.

Temporarily suspends the layout logic for the control.

Returns a String containing the name of the Component, if any. This method should not be overridden.

Causes the control to redraw the invalidated regions within its client area.

Updates the bounds of the control with the current size and location.

Updates the bounds of the control with the specified size and location.

Updates the bounds of the control with the specified size, location, and client size.

Forces the assigned styles to be reapplied to the control.

Updates the control in its parent's z-order.

Processes Windows messages.

Special character used to specify that an Application Identifier (AI) is 2-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 3-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 4-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Special character used to specify that an Application Identifier (AI) is 5-digits long. Used by GS1-128 and UCC/EAN-128 barcodes.

Function 1 Symbol Character (FNC1) used by Code 128 barcodes.

Function 2 Symbol Character (FNC2) used by Code 128 barcodes.

Function 3 Symbol Character (FNC3) used by Code 128 barcodes.

Function 4 Symbol Character (FNC4) used by Code 128 barcodes.

End Of Transmission character (ASCII 4).

Function 1 Symbol Character (FNC1) used by GS1-128 and UCC/EAN-128 barcodes.

Group Separator character (ASCII 29).

Record Separator character (ASCII 30).

Gets the AccessibleObject assigned to the control.

Gets or sets the default action description of the control for use by accessibility client applications.

Gets or sets the description of the control used by accessibility client applications.

Gets or sets the name of the control used by accessibility client applications.

Gets or sets the accessible role of the control

Gets or sets whether checksum must be generated and attached to the value to encode.

Gets or sets a value indicating whether the control can accept data that the user drags onto it.

Gets or sets the edges of the container to which a control is bound and determines how a control is resized with its parent.

Gets or sets whether AntiAlias effect must be applied to all the texts in the barcode image.

Gets or sets the image file (path or Base64 string) that will be used as a pattern to fill all the bars that compose the barcode symbol. Note: this feature is not available when exporting the barcode symbol to EPS format.

Gets or sets the logo image file (path or Base64 string) that will be used to stamp it on top or bottom of the barcode symbol. Note: this feature is not available when exporting the barcode symbol to EPS format.

Gets or sets the opacity [from 1 to 100 (fully opaque)] of the image logo file. Default is 100.

Gets or sets the percentage used to resize the logo image based on the barcode symbol size. Default is 20.

Gets or sets the position of the logo image file on the barcode symbol. Default is Top.

Gets or sets where this control is scrolled to in ScrollControlIntoView(Control).

Gets or sets whether the barcode image is automatically resized to display its entire contents.

Gets or sets the Encoding Name (Code Page) to be used for Aztec Code in Byte Compaction mode. Default it ISO-8859-1.

Gets or sets the Error Correction Percentage to apply for Aztec Code symbology. Default is 23.

Gets or sets the Aztec Code Format to use on that symbology.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether tilde character should be processed when Aztec Code is being generated.

Gets or sets the Aztec Code Rune value. It must be a value from 0 to 255 and is available for Aztec Code Compact Format only.

Gets or sets the extra space inside the border. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the unit of measure for the barcode dimensions. Defauls is Inch. It must precede any barcode dimension properties settings.

Gets or sets the bars' color of the barcode.

Gets or sets the bars' height of the barcode. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the wide bars' width compared to the narrow bars' width. In barcode terminology this is N value.

Gets or sets the narrow bars' width of the barcode. In barcode terminology this is called X value. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the Bar Width Adjustment.

Gets or set the bearer bars' type that must be drawn with the barcode image. Bearer bar is only available for 2 of 5, Code 128 and UCC.EAN 128 barcodes.

Gets or sets the bearer bars' width. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the BindingContext for the control.

Gets or sets the barcode control border's color.

Gets or sets the barcode control's border style.

Gets or sets the barcode image border's width. The unit of measure must be specified to BarcodeUnit property.

Gets the distance, in pixels, between the bottom edge of the control and the top edge of its container's client area.

Gets or sets the height of the margin below the barcode bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the size and location of the control including its nonclient elements, in pixels, relative to the parent control.

Gets a value indicating whether the ImeMode property can be set to an active value, to enable IME support.

Gets a value indicating whether the control can receive focus.

Determines if events can be raised on the control.

Gets a value indicating whether the control can be selected.

Gets or sets a value indicating whether the control has captured the mouse.

Gets or sets a value indicating whether the control causes validation to be performed on any controls that require validation when it receives focus.

Gets the rectangle that represents the client area of the control.

Gets or sets the height and width of the client area of the control.

Gets or sets the start character for Codabar symbology. Possible values are: A, B, C or D.

Gets or sets the stop character for Codabar symbology. Possible values are: A, B, C or D.

Gets or sets the value to encode.

Gets or sets the characters set to use in the Code 128 symbology. Possible values are: Auto, A, B or C.

Gets or sets the mode to use for Code16k symbology. Modes supported are: Mode 0, 1, and 2.

Gets or sets the text alignment for Code and HumanReadableText properties.

Gets or sets the string pattern to format the Code property. The result of the format process is the one which will be encoded! Based on String.Format(). Default value is empty (Disabled).

Gets the name of the company or creator of the application containing the control.

Gets the IContainer that contains the Component.

Gets a value indicating whether the control, or one of its child controls, currently has the input focus.

Gets or sets the shortcut menu associated with the control.

Gets or sets the ContextMenuStrip associated with this control.

Gets the collection of controls contained within the control.

Gets a value indicating whether the control has been created.

Gets the required creation parameters when the control handle is created.

Gets or sets the cursor that is displayed when the mouse pointer is over the control.

Gets the data bindings for the control.

Gets or sets the Encoding Name (Code Page) to be used for DataMatrix in Byte Compaction mode. Default it ISO-8859-1.

Gets or sets the DataMatrix Encoding to use on that symbology.

Gets or sets the File ID of the Data Matrix symbol. Its value must be a sequence of codewords (Each codeword value must be a number between 001 and 254) and must be the same for all data segments.

Gets or sets the DataMatrix Format to use on that symbology.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether tilde character should be processed when DataMatrix code is being generated.

Gets or sets the number of Data Matrix symbols. Its value must be less than or equal to 16.

Gets or sets the Index for a Data Matrix symbol. Its value must be 1 up to 16 and must be less than or equal to the value in DataMatrixSegmentCount property.

Gets or sets the default cursor for the control.

Gets the default Input Method Editor (IME) mode supported by the control.

Gets the space, in pixels, that is specified by default between controls.

Gets the length and height, in pixels, that is specified as the default maximum size of a control.

Gets the length and height, in pixels, that is specified as the default minimum size of a control.

Gets the internal spacing, in pixels, of the contents of a control.

Gets the default size of the control.

Gets a value that indicates whether the Component is currently in design mode.

Gets or sets whether checksum value must be displayed after the value to encode in the barcode image.

Gets or sets whether the value to encode must be displayed in the barcode image.

Gets or sets whether light margin indicators must be displayed in the barcode image. Only available for EAN/UPC Symbologies.

Gets the rectangle that represents the display area of the control.

Gets or sets whether start and stop characters must be displayed in the barcode image.

Gets a value indicating whether the base Control class is in the process of disposing.

Gets or sets which control borders are docked to its parent control and determines how a control is resized with its parent.

Gets or sets a value indicating whether this control should redraw its surface using a secondary buffer to reduce or prevent flicker.

Gets or sets whether the recommended Bar Width Adjustment for digits 1, 2, 7 and 8 by GS1 spec is enabled. Default is False.

Gets or sets the Magnification Factor for EAN/UPC barcodes. Default is 0 (Zero/Disabled).

Gets or sets the supplement type to use with EAN and UPC symbologies.

Gets or sets the supplement value for EAN and UPC symbologies.

Gets or sets the gap separation between the barcode and its supplement. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the height of the margin above the EAN/UPC supplement bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets a value indicating whether the control can respond to user interaction.

Gets the list of event handlers that are attached to this Component.

Gets or sets whether the extended versions for Code 39 and/or Code 93 symbologies must be used.

Gets a value indicating whether the control has input focus.

Gets or sets the font of the text displayed by the control.

Gets or sets the height of the font of the control.

Gets or sets the foreground color of the control.

Gets or sets whether guard bars must be drawn.

Gets or sets the guard bars' height. The unit of measure must be specified to BarcodeUnit property.

Gets the window handle that the control is bound to.

Gets or sets the Encoding Name (Code Page) to be used for Han Xin Code Binary Byte Encoding mode. Default it ISO-8859-1.

Gets or sets the Han Xin Code Encoding to use on that symbology. Default is Auto.

Gets or sets the Error Correction Level to apply for Han Xin Code symbology. Default is L1.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether tilde character should be processed when Han Xin Code is being generated. Default is False.

Gets or sets the Han Xin Code Version to use on that symbology. Default is Auto.

Gets a value indicating whether the control contains one or more child controls.

Gets or sets the height of the control.

Gets or sets whether the Human Readable Text is formatted as specified by HIBC Standards i.e. Zeros are displayed as Slashed-Zeros and the Space character is displayed as an Underscore.

Gets or sets whether the ISO/IEC 15434 Protocol is used to encode the HIBC LIC or PAS Data Structures in 2D symbols. Default is False.

Gets or sets the Human Readable Text to be displayed instead of the value to encode specified in the Code property.

Gets a System.Drawing.Image object of the barcode image.

Gets or sets the Input Method Editor (IME) mode of the control.

Gets a value indicating whether the caller must call an invoke method when making method calls to the control because the caller is on a different thread than the one the control was created on.

Gets or sets a value indicating whether the control is visible to accessibility applications.

(Obsolete) Do not use IsbnSupplementCode property. Use EanUpcSupplementCode property instead.

Gets or sets the ISBT 128 Data Structure to be generated.

Gets a value indicating whether the value to encode specified in the Code property is valid based on the Barcode Symbology specified in the Symbology property.

Gets a value indicating whether the control has been disposed of.

Gets a value indicating whether the control has a handle associated with it.

Gets a value indicating whether the control is mirrored.

Gets or sets the H mark type for the left side of ITF-14 barcode symbol. Default is None.

Gets or sets the H mark type for the right side of ITF-14 barcode symbol. Default is None.

Gets a cached instance of the control's layout engine.

Gets or sets the distance, in pixels, between the left edge of the control and the left edge of its container's client area.

Gets or sets the License Key.

Gets or sets the License Owner.

Gets or sets the coordinates of the upper-left corner of the control relative to the upper-left corner of its container.

Gets or sets the space between controls.

Gets or sets the MaxiCode mode.

Gets or sets whether tilde character should be processed when MaxiCode code is being generated.

Gets or sets the number of MaxiCode symbols in a Structured Appended format. Its value must be less than or equal to 8.

Gets or sets the Symbol Index for a Structured Appended MaxiCode. Its value must be 1 up to 8 and must be less than the value in MaxiCodeSymbolCount property.

Gets or sets the size that is the upper limit that GetPreferredSize(Size) can specify.

Gets or sets the height of the MICR characters. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the gap spacing between each MICR character specified in the Code property. It must be a comma separated list of float point numbers (in InvariantCulture) specifying the desired spacing between each MICR char. The unit of measure must be specified to BarcodeUnit property IMPORTANT: Spacing is the distance between the right average edge of adjacent characters.

Gets or sets the widths of each MICR character specified in the Code property. It must be a comma separated list of float point numbers (in InvariantCulture) specifying the desired width of each MICR char. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the MicroPDF417 version (a predefined combinations of numbers of columns and rows) to be generated.

Gets or sets the Micro QR Code Version to use on that symbology.

Gets or sets the size that is the lower limit that GetPreferredSize(Size) can specify.

Gets or sets a value indicating whether the barcode image must be converted to monochrome a.k.a. Black and White 1 bit per pixel format.

Gets or sets the checksum mode to be used on MSI symbology.

Gets or sets the name of the control.

Gets a list of settings that were used to generate the selected symbology.

Gets or sets padding within the control.

Gets or sets the parent container of the control.

Gets or sets the ratio of the height to the overall width of the PDF417 symbol. Its value must be 0 (zero) up to 1 (one).

Gets or sets the Encoding Name (Code Page) to be used for PDF417 in Byte Compaction mode. Default it ISO-8859-1.

Gets or sets the number of columns to use for PDF417 symbology.

Gets or sets the Compaction Type to apply for PDF417 symbology.

Gets or sets the Error Correction Level to apply for PDF417 symbology.

Gets or sets the File ID of the Macro PDF417 symbol. Its value must be a sequence of codewords (Each codeword value must be a number between 000 and 899) and must be the same for all data segments.

Gets or sets the number of rows to use for PDF417 symbology.

Gets or sets the number of Macro PDF417 symbols. Its value must be less than or equal to 99999.

Gets or sets the Segment Index for a Macro PDF417 symbol. Its value must be 0 (zero) up to 99998 and must be less than the value in Pdf417SegmentCount property.

Gets or sets whether the right side of PDF417 barcode is truncated (removed).

Gets or sets the gap between Pharmacode bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the width of Pharmacode Thick Bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the width of Pharmacode Thin Bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the short bars' height of Planet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tall bars' height of Planet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether start and stop characters must be added and drawn in the barcode image.

Gets or sets the gap spacing between bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tracker bar's height. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tracker bar's width. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the short bars' height of Postnet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the tall bars' height of Postnet symbology. The unit of measure must be specified to BarcodeUnit property.

Gets the size of a rectangular area into which the control can fit.

Gets the product name of the assembly containing the control.

Gets the version of the assembly containing the control.

Gets or sets the Encoding Name (Code Page) to be used for QR Code Byte Compaction mode. Default it ISO-8859-1.

Gets or sets the QR Code Encoding to use on that symbology.

Gets or sets the Error Correction Level to apply for QR Code symbology.

Gets or sets the module size. The unit of measure must be specified to BarcodeUnit property.

Gets or sets whether tilde character should be processed when QR Code is being generated.

Gets or sets the QR Code Version to use on that symbology.

Gets or sets the quiet zone's width. The unit of measure must be specified to BarcodeUnit property.

Gets a value indicating whether the control is currently re-creating its handle.

Gets or sets the window region associated with the control.

This property is now obsolete.

Gets or sets a value indicating whether the control redraws itself when resized.

Gets the distance, in pixels, between the right edge of the control and the left edge of its container's client area.

Gets or sets a value indicating whether control's elements are aligned to support locales using right-to-left fonts.

Gets or sets the rotation angle to apply on the barcode image.

Gets a value that determines the scaling of child controls.

Gets or sets the number of segments per row to be used in GS1 DataBar Expanded Stacked or RSS Expanded Stacked symbologies. It must be an even number ranging from 2 up to 22. Default is 4.

Gets a value indicating whether the control should display focus rectangles.

Gets a value indicating whether the user interface is in the appropriate state to show or hide keyboard accelerators.

Gets or sets the site of the control.

Gets or sets the height and width of the control.

Gets or sets a value that determines whether barcode drawing should use device-specific pixel settings during rendering. Default value is false.

Gets or sets the barcode symbology to generate.

Gets or sets the tab order of the control within its container.

Gets or sets a value indicating whether the user can give the focus to this control using the TAB key.

Gets or sets the object that contains data about the control.

Gets or sets the Telepen Encoding to use on that symbology.

Gets or sets the additional text to show in the barcode image e.g.: Product ID. Note: This is not the value to encode nor the Human Readable Text.

Gets or sets the text alignment for Text property.

Gets or sets the Font object for using when rendering Text property.

Gets or sets the text color for using when rendering Text property.

Gets or sets the string pattern to format the Text property. Based on String.Format(). Default value is empty (Disabled).

Gets or sets the TIFF compression algorithm to be used when saving barcodes in such image format.

Gets or sets the distance, in pixels, between the top edge of the control and the top edge of its container's client area.

Gets the parent control that is not parented by another Windows Forms control. Typically, this is the outermost Form that the control is contained in.

Gets or sets the height of the margin above the barcode bars. The unit of measure must be specified to BarcodeUnit property.

Gets or sets the number system to use for UPC-E symbology.

Gets or sets whether quiet zones are used for drawing Text and/or Code properties.

Gets or sets a value indicating whether to use the wait cursor for the current control and all child controls.

Gets or sets the USPS FIM pattern to use on that symbology.

Gets or sets the number of horizontal bars to be drawn.

Gets or sets a value indicating whether the control and all its parent controls are displayed.

Gets or sets the width of the control.

This property is not relevant for this class.

This event is not relevant for this class.

Occurs when the value of the BackColor property changes.

Occurs when the value of the BackgroundImage property changes.

Occurs when the BackgroundImageLayout property changes.

Occurs when the value of the BindingContext property changes.

Occurs when the value of the CausesValidation property changes.

Occurs when the focus or keyboard user interface (UI) cues change.

Occurs when the control is clicked.

Occurs when the value of the ClientSize property changes.

Occurs when the value of the ContextMenu property changes.

Occurs when the value of the ContextMenuStrip property changes.

Occurs when a new control is added to the Control ControlCollection.

Occurs when a control is removed from the Control ControlCollection.

Occurs when the value of the Cursor property changes.

Occurs when the component is disposed by a call to the Dispose  method.

Occurs when the value of the Dock property changes.

Occurs when the control is double-clicked.

Occurs when a drag-and-drop operation is completed.

Occurs when an object is dragged into the control's bounds.

Occurs when an object is dragged out of the control's bounds.

Occurs when an object is dragged over the control's bounds.

Occurs when the Enabled property value has changed.

Occurs when the control is entered.

Occurs when the Font property value changes.

Occurs when the ForeColor property value changes.

Occurs during a drag operation.

Occurs when the control receives focus.

Occurs when a handle is created for the control.

Occurs when the control's handle is in the process of being destroyed.

Occurs when the user requests help for a control.

Occurs when the ImeMode property has changed.

Occurs when a control's display requires redrawing.

Occurs when a key is pressed while the control has focus.

Occurs when a key is pressed while the control has focus.

Occurs when a key is released while the control has focus.

Occurs when a control should reposition its child controls.

Occurs when the input focus leaves the control.

Occurs when the Location property value has changed.

Occurs when the control loses focus.

Occurs when the control's margin changes.

Occurs when the control loses or gains mouse capture.

Occurs when the control is clicked by the mouse.

Occurs when the control is double clicked by the mouse.

Occurs when the mouse pointer is over the control and a mouse button is pressed.

Occurs when the mouse pointer enters the control.

Occurs when the mouse pointer rests on the control.

Occurs when the mouse pointer leaves the control.

Occurs when the mouse pointer is moved over the control.

Occurs when the mouse pointer is over the control and a mouse button is released.

Occurs when the mouse wheel moves while the control has focus.

Occurs when the control is moved.

Occurs when the control's padding changes.

Occurs when the control is redrawn.

Occurs when the Parent property value changes.

Occurs before the KeyDown event when a key is pressed while focus is on this control.

Occurs when AccessibleObject is providing help to accessibility applications.

Occurs during a drag-and-drop operation and enables the drag source to determine whether the drag-and-drop operation should be canceled.

Occurs when the value of the Region property changes.

Occurs when the control is resized.

Occurs when the RightToLeft property value changes.

Occurs when the Size property value changes.

Occurs when the control style changes.

Occurs when the system colors change.

Occurs when the TabIndex property value changes.

Occurs when the TabStop property value changes.

Occurs when the Text property value changes.

Occurs when the control is finished validating.

Occurs when the control is validating.

Occurs when the Visible property value changes.